Oven & Cooktop Installation on the Sunshine Coast
Bought a new oven or induction cooktop? Hardwired appliance connections are licensed electrical work in Queensland. We install, upgrade the circuit when needed, and certify it, so you cook that night.
Free estimate within 1 business day of receiving your photos. We can't estimate without photos, and we don't visit to estimate. If your photos can't settle it, we'll tell you why and book a paid visit at our standard call-out rate.
SAA S6093214
MEA member 23598 · QLD licence 92489
Nuvolt Electrical Solutions connects ovens, cooktops and induction cooktops across the Sunshine Coast, from Caloundra to Noosa and the hinterland, including the new circuit an induction cooktop often needs. In Queensland a hardwired oven or cooktop must be connected by a licensed electrician, and ours is a licensed electrician (QLD Lic 92489) working from our Nambour workshop.
The appliance store delivers the new oven, and then you discover the fine print: hardwired ovens and cooktops must be connected by a licensed electrician in Queensland, and an induction cooktop often draws more current than the old circuit was ever built for. That last part is the trap: a shiny induction cooktop connected to an undersized 1990s circuit trips breakers at Sunday roast scale, or worse, quietly overheats the cable in the wall. Nuvolt installs ovens, cooktops and full kitchen appliance packages across the Sunshine Coast: the connection, the circuit behind it and the certificate, done same visit wherever the wiring allows.
Kitchen Appliances, Connected Properly
New appliance, renovation or a gas kitchen going electric, we handle the wiring from the switchboard to the socket behind the appliance.
Oven installation and replacement
Wall ovens, underbench ovens and double ovens, connected to a correctly rated circuit with proper isolation. Replacing like for like is often quick, but we always verify the circuit really matches the new appliance's rating instead of assuming the old wiring will do.
Induction and ceramic cooktops
Induction is the big one: a large induction cooktop can demand its own 32 amp circuit, well beyond many existing kitchen circuits. We check what is behind your kitchen, run or upgrade the dedicated circuit when needed, and connect the cooktop to manufacturer spec so the warranty stands.
Gas to induction conversions
Going all electric? We handle the electrical side of retiring gas cooking: the new dedicated circuit, switchboard protection and the cooktop connection. Paired with solar, induction cooking runs almost free at lunchtime, and plenty of Coast homes are making exactly this switch.
Rangehoods, dishwashers and the rest
While we are behind the kitchen we connect the supporting cast: rangehoods, dishwashers, built in microwaves and appliance points inside cabinetry, each on appropriate protection. Renovating? Give us the appliance list and we wire the kitchen once, properly, instead of visit by visit.
Check This Before the Appliance Arrives
Five minutes of checking before delivery day saves the classic new kitchen headache of an appliance that cannot be connected:
- The new appliance's electrical rating, in kW or amps, from the spec sheet
- Whether it plugs in or must be hardwired: hardwired means a licensed electrician in QLD
- What the old appliance was: swapping gas or a small ceramic for big induction usually means a new circuit
- The age of your switchboard: older boards may need a breaker or safety switch upgrade to add a circuit
- Delivery timing: book the electrical connection so the old appliance out and new one in happen together
- Whether the kitchen is part of a bigger renovation: one wiring plan beats piecemeal connections
Dealing directly with a licensed contractor (Lic# 92489), not a call centre or a commission salesperson.
Australian owned and operated. Local crew on the Sunshine Coast. No overseas call centres.
Why induction trips old circuits
A gas cooktop uses no meaningful electricity and even older ceramic cooktops drew modest current, so many kitchens were wired accordingly. A modern induction cooktop with boost functions can pull double or triple that on full song. Connected to the old undersized circuit it nuisance trips at the worst moments, and an overloaded cable that does not trip is a heat problem inside your wall. The fix is a dedicated, correctly sized circuit, which we quote up front after seeing your switchboard, not as a surprise on install day.
The certificate matters
Every hardwired appliance connection we do is tested and certified as Queensland requires. That paperwork is what stands behind you for the appliance warranty, your insurance and any future sale of the home. Store arranged installers vary widely; with us you deal directly with the licensed contractor doing the work, and the connection carries our lifetime workmanship warranty (conditions apply, see our Terms) like everything else we touch.
Checked, Connected & Certified
Send Details
Tell us the appliance model, ideally before it is delivered. We send you a secure link to upload the spec sheet and photos of the existing connection and your switchboard.
Free Estimate
We check the existing circuit and switchboard against the new appliance and send a written estimate within 1 business day of receiving your photos, confirmed before anything is ordered.
Install
Old appliance disconnected, new circuit run or upgraded if needed, and the new appliance connected to manufacturer specification.
Test & Certify
Connection tested under load, protection verified, and your electrical certificate provided. Cook that night.
Oven & Cooktop Questions
Straight answers on appliance connections, induction circuits and going all electric, from the licensed contractor doing the work.
Can I connect a new oven or cooktop myself?
If it comes with a standard plug and an existing suitable socket, plugging it in is fine. But most ovens and nearly all cooktops are hardwired, and in Queensland hardwired connections are strictly licensed electrical work with heavy penalties for DIY. There is a practical reason behind the law: these are the highest load appliances in the house, and an undersized or badly terminated connection is a genuine fire risk sitting behind your cabinetry.
The store offered installation. Why use you instead?
Sometimes store arranged installation works out fine for a straight like for like swap. Where it falls over is the moment the job is not simple: the circuit is undersized for the new appliance, the switchboard needs a breaker or safety switch, or the old wiring fails testing. Store installers commonly walk away from those jobs, leaving you with a disconnected kitchen and a second booking anyway. We assess the whole picture first, quote it once and finish it once.
Do I need a new circuit for an induction cooktop?
Often, yes. Smaller induction units can sometimes run on a healthy existing cooktop circuit, but larger cooktops with boost functions commonly specify a 32 amp dedicated circuit, and kitchens wired for gas cooking may have no cooktop circuit at all. It depends entirely on the appliance's rating and what is actually in your wall and switchboard, which is exactly what we establish from clear photos of your board before you are committed.
We are switching from gas cooking to induction. What is involved electrically?
A dedicated circuit from the switchboard to the cooktop position, correctly rated protection, and the connection itself, plus a switchboard tidy up if the board is short on space or safety switches. Capping the gas line is a plumber's task and we coordinate timing so the kitchen is never out of action longer than necessary. If you have solar, induction is the natural partner: your panels are strongest exactly when lunch gets cooked.
Can you install the oven the same day it is delivered?
That is the goal, and the way to get there is sorting your quote before delivery. If the existing circuit checks out, the install after delivery is usually quick. If the circuit needs upgrading we can often do that ahead of time, so delivery day is just connect, test and cook. Booking us after the appliance is already sitting in the kitchen works too, it just risks a gap if the wiring needs work.
Do ovens and cooktops need their own safety switch?
New circuits in Queensland must be protected by a safety switch, and that includes new oven and cooktop circuits. Existing older circuits often predate the requirement, and while a straight appliance swap does not always force an upgrade, we will tell you plainly when your board is behind current protection standards. Many customers pair the appliance install with a switchboard tidy up, or with our $199 electrical safety check for the whole picture.
How do I get a price?
Ask for a free estimate online with the new appliance's model number. We send you a secure link to upload the spec sheet and photos of your switchboard, and check the circuit against it. The estimate comes back within 1 business day of receiving your photos.
Related services
New Appliance? Get It Connected Right
Ovens, cooktops and full kitchens, connected and certified by a licensed Sunshine Coast electrician. Free estimate from your photos, back within 1 business day of receiving them.
Where we do this
Appliance connections and induction conversions run across the whole Coast, with kitchen renovations keeping us busy from the beaches to the hinterland.