Data & Communications Cabling
Structured Cat5e, Cat6, Cat6A and Cat7 data cabling, fibre, comms rooms and network points for homes, businesses and industrial sites across South East Queensland, run tidy and direct from the licensed contractor doing the work.
SAA accredited for solar & battery, S6093214
Master Electricians member 23598 · QLD Lic# 92489
If it carries data or a signal, Nuvolt can cable it. As an ACMA-registered Open cabler and licensed Queensland electrical contractor we design and install structured data and communications cabling across the Sunshine Coast, Brisbane and South East Queensland, from a single home data point to a full commercial comms room. That means Cat5e, Cat6, Cat6A and Cat7 copper, fibre backbone, cable tray and containment, racks and patch panels, Wi-Fi access points and NBN, all neatly run, properly terminated, tested and quoted at a fixed price before any work begins.
Get a Fixed-Price Quote for Your Cabling
Tell us the site and what you need, a handful of extra points, a new office fit-out, a comms room tidy-up or a full structured cabling system. We'll recommend the right cable and give you a fixed price before any work begins.
- →ACMA-registered Open cabler & licensed electrician, direct from the contractor doing the work
- →Cat5e, Cat6, Cat6A, Cat7 & fibre, terminated, labelled and tested
- →Homes, offices & industrial sites across South East Queensland
Send your enquiry
Takes 30 seconds. We reply within 2 hours during business hours. If it is urgent, call 0425 547 520.
From a Single Point to a Whole Comms Room
The full data and communications scope, whether you're a homeowner adding points or a business wiring a fit-out.
Structured cabling systems
Planned, standards-based cabling for offices, fit-outs, retail, warehouses and multi-storey sites. Horizontal and backbone runs from a central comms room out to every work area, terminated on patch panels and fully labelled so the system is documented and easy to grow.
Comms rooms, server rooms & data centres
Design and build of comms rooms and data racks, from a single wall-mount cabinet to floor-standing racks with patch panels, cable management, switching and clean power. Neat, cross-connected and labelled to a standard your IT team can actually work on.
Cat5e, Cat6, Cat6A & Cat7 copper
The right twisted-pair category for the job, from Cat5e for basic voice and data through to Cat6A and Cat7 for 10-Gigabit runs, PoE cameras, access points and future headroom. Terminated to spec and tested, not just crimped and hoped.
Fibre optic backbone
Single-mode and multi-mode fibre for high-speed links between buildings, floors and comms rooms, where distance or bandwidth is beyond copper. Terminated, spliced where required and tested for loss.
Cable tray, ladder & containment
The clean, load-rated tray and containment that keeps data and power separated and every cable supported and accessible, the difference between a comms room you're proud of and a bird's nest behind the rack.
Testing, certification & fault-finding
Every permanent link tested and results recorded so you know each port performs to its category. We also trace, re-terminate and certify existing cabling that's dropping out, so you're not chasing intermittent faults.
Wi-Fi access points & networking
Wired access points sited for even coverage and run back on data cable, plus switches, PoE and patching, so wireless and wired work together across the whole site instead of one overworked router.
Home data, TV, phone & NBN points
For homes and small offices: extra Cat6 data points, TV and antenna outlets, phone points and NBN lead-in and patching, run tidily through walls and ceilings and finished properly at the wall plate.
Cat5e, Cat6, Cat6A or Cat7?
The cable category decides how fast and how far your network can run, and how much headroom you'll have as devices, cameras and access points get hungrier. Over-spec everything and you pay for cable you'll never use; under-spec it and you're re-cabling in a few years.
We recommend the right category per run, and where distance or bandwidth is beyond copper, we bring in fibre backbone. The result is a system matched to how you actually work, not a one-size-fits-all guess.
Cat5e
Up to 1 GbpsVoice, basic data and light PoE. A sound, economical choice for straightforward points where Gigabit is plenty.
Cat6
1 Gbps (10G to ~55m)The sensible default for most new work. Solid headroom for cameras, access points and busy offices.
Cat6A
10 Gbps to 100mFull-distance 10-Gigabit and higher-power PoE. The standard for serious commercial and comms-room backbones.
Cat7 / fibre
10 Gbps+ / very highShielded Cat7 and fibre for the most demanding links, long runs, heavy interference or data-centre-grade backbones.
Designed, Run & Tested
Design & Survey
We walk the site, map where the points, racks and runs need to go, and recommend the right cable category and pathways for how you actually use the space.
Cable & Contain
Cables are run on proper tray and containment, kept clear of power interference, and drawn back to a central comms room or rack, tidy and accessible from day one.
Terminate & Label
Every point is terminated to its category on patch panels and outlets, then labelled both ends so the system is documented and easy to work on later.
Test & Certify
Each link is tested and the results recorded, so you get a network that's proven to perform, plus the appropriate certification on completion.
Data & Comms Questions
Straight answers on structured cabling, comms rooms, Cat5e to Cat7, fibre, testing and home points, from the contractor doing the work.
Do you do commercial and industrial cabling, not just homes?
Yes. Alongside home data points, we design and install full structured cabling systems for offices, fit-outs, retail, warehouses and industrial sites, including comms rooms, racks, cable tray and backbone. You deal directly with a licensed contractor, not a subbie chain.
Can you build or tidy up a comms room, server room or data rack?
Yes. We install wall-mount and floor-standing racks, patch panels, cable management and switching, and we re-terminate and re-organise messy existing rooms into a clean, labelled, cross-connected system your IT team can actually work on.
What's the difference between Cat5e, Cat6, Cat6A and Cat7?
It's mostly speed and headroom. Cat5e handles Gigabit for voice and basic data; Cat6 is the sensible default for most new work; Cat6A carries full-distance 10-Gigabit and higher-power PoE for serious commercial use; Cat7 and fibre cover the most demanding, long or high-interference links. We recommend the right category for each run so you're not under- or over-spending.
Should I run copper or fibre?
Copper (Cat6/Cat6A) is ideal to the desk, camera or access point over normal distances. Fibre comes in for backbones between floors or buildings, long runs, or where you need bandwidth and distance beyond copper. Many sites use both, and we'll design the mix that suits yours.
Do you test and certify the cabling?
Yes. We test permanent links and record the results so you know each port performs to its category, rather than just assuming it works. That documentation is worth having for warranty, handover and future troubleshooting.
Can you find and fix a network point that keeps dropping out?
Yes. We trace, test and re-terminate faulty cabling and outlets, and sort out the intermittent drop-outs that come from poor terminations, damaged cable or an overloaded, tangled comms room.
Can you add extra data, TV or phone points to an existing home?
Yes. We run new Cat6 data points, TV and antenna outlets and phone points into existing rooms, threading cable through walls and ceilings where access allows and finishing each point neatly at the wall plate. We assess access on-site first so you know what's involved before any work starts.
Do you handle NBN cabling and getting my points working?
Yes, on the cabling side. We run the NBN lead-in and patch your data points back to the NBN connection box and router so your wired outlets work once the service is connected. The internet plan and service activation are arranged with your provider.
Are you registered to do telecommunications cabling?
Yes. Dan holds an ACMA Open Cabler Registration (registration no. A054843, via ACRS) as well as running a licensed Queensland electrical contracting business (Lic# 92489). Open is the broad registration category, covering customer cabling connected to the telecommunications network, including structured data, coaxial and fibre. So your data and comms work is done legally and to the ACMA Cabling Provider Rules, not by an unregistered handyman. It matters for compliance, insurance and NBN, and it's a step many operators skip.
Do I get a fixed price?
Yes. We assess the job on-site and give you a fixed price before we start, with no hidden extras. You deal directly with the contractor doing the work.
Need Data or Comms Cabling?
From extra home points to a full structured cabling system and comms room, across the Sunshine Coast, Brisbane and South East Queensland. Book a $99 site inspection with a same day quote, or call us today.
Where we do this
Structured cabling and comms work follows the commercial centres, offices and new builds across the Coast and north Brisbane.